Connect to the SU-Secure Wireless Network using an Android device
This document contains instructions on how to connect your Android smartphone or tablet to our SU-Secure wireless network. Note that Android devices vary widely by manufacturer, operating system flavor/version, and carrier/provider. Please see your existing documentation and support sites for your device for exact instructions.
If the Automated System Instructions below do not work please use the Manual Setup.
Automated System Instructions
- Select Settings. You can usually find this in your Menu button.
- Select Wireless & Networks
- Select WiFi Settings
- From your list of available networks select SU-Connect.
- Open your web browser and go to http://connect.salisbury.edu/
- If you get a certificate message, tap Continue to accept the certificate.
Choose Personally Owned Device or Salisbury University Owned Devices (having an SU tag).
Leave Local Server selected and click Download
- Once the download is finished, you can access the SecureW2_JoinNow.apk file from your Downloads by swiping down from the top of your Android.
If you receive a warning stating "This type of file can harm your device. Do you want to keep SecureW2_JoinNow.apk anyway?" Choose OK.
You may receive a message stating your phone is not allowed to install unknown apps. Select Settings and verify "Allow from this source" is enabled.
When prompted "Do you want to install this application?" select Install or Open.
You will be brought to the screen shown below with Secure W2 at the top. When you arrive at this screen go back to the browser used initially and select Join Now.
If you have location sharing turned off you will see Location Permission Required. Please select Yes, App will configure and connect.
Give permission (Allow) for the JoinNow MultiOS app to access your location.
Enter your SU username and password when prompted and select continue.
You have now connected to SU-Secure. Click Next to continue.
You're finished! Choose Done to complete the process.
Manual Setup
For some devices manual connection is required, if the connection wizard does not work, you will need to manually configure the settings. This may vary depending on your device (check your manual or help files for information).
- Connect directly to the SU-Secure wireless network.
- For EAP Method, you will need to select PEAP.
- For Phase 2 authentication select MSCHAPv2.
- For CA certificate select Use system certificates.
- For security certificate, be sure it is set to Default or Do Not Validate.
- If a Domain is required enter salisbury.edu
- In the Identity field enter your SU username. You may need to use just the username, SALISBURY\username or username@salisbury.edu, depending on your device.
- Leave Anonymous identity blank if requested.
- Enter your SU password.
Related articles
Filter by label
There are no items with the selected labels at this time.
Did this solve your issue??